2CV dashboard indicator LED lights

With the prototype LED dashboard indicator light finalised I started on making the full set of finished items.

It was a very small scale production line:

  1. Remove light glasses from the bezels
  2. Cut the PVC grommets
  3. Cut the rubber bungs
  4. Cut the LED wires to length
  5. Attach the crimp connectors and colour the negative terminals
  6. Solder the wires to the connectors
  7. Test the electrical connections
  8. Fit the LED, grommet and bung into the bezels
  9. Attach the light tubes

Assembly line of 2CV dashboard indicator LEDs

With each of these complete and tested I now have a full set of LED dashboard indicator lights ready to fit.

2CV dashboard indicator LEDs assembled

Full set of completed 2CV dashboard indicator LEDs

Other posts in this series

  1. Deconstructing 2CV dashboard indicator lights
  2. 2CV dashboard indicator LED lights proof of concept
  3. 2CV dashboard indicator LED lights prototype
  4. 2CV dashboard indicator LED lights
  5. 2CV dashboard indicator LED lights – fitting