Ably assisted by the fearsome hound (and the head mechanic of TomB engineering) had a good look over Judith and carried out the following:
- Changed the oil and filter
- Replaced the coil with a new dry coil as recommended
- Replaced the HT leads and plugs (old plugs were a bit sooty but otherwise relatively fresh)
- Replaced the foam air filter (didn’t give it an oil bath)
- Greased the drive shafts and king pins (near side KP took a lot of grease)
- Checked the fluid levels
- Checked the electrics (not sure what the item is under the fan – possibly headlight related)
- Re-torqued the wheel nuts